快速接头
液压菜鸟
液压菜鸟
  • 发帖数14
  • 液压币81枚
hao
阅读:2008回复:0

[分享]液压快速接头选择和使用综述—使用指南

楼主#
更多 发布于:2020-07-31 08:56


液压快速接头-使用指


图片:123.jpg


在系统内存在高压时,严禁对接或拆断快速接头,不恰当的使
用和维护产品可能会造成产品损坏,并对人员和设备造成伤害。
● 为降低振动和机械应力对产品造成损坏,避免由于系统回路
的振动导致意外断开或损坏接头,建议选用胶管。
● 建议所有系统、设备以及操作人员采取保护设施。
● 安装和拆卸快速接头时,请使用正确的工具。
● 建议安装在便于连接和拆卸的位置,最大限度的减少对操作
人员带来的风险。
● 快速接头始终应用在允许的工作压力和温度范围以内。
● 润滑密封件可以更有利于快速接头的对接。
● 螺纹式快速接头必须以超过标记线以上视为连接到位,否则
会影响流量及产品使用寿命。
Installation of Quick couplings can be only done if the circuit isdepressurized
Make sure the energy supply is disconnectede
Aways wear protective dothinge
Use flexible hoses to withstand better the system vibration andmechanical
tensions on the couplings.
Use appropriate tools to act only over flat sides of the couplings
Hose must be installed so that the connection/disconnection can be
doneeasily and aligned positione
Make sure to work always within permitted limits on pressure andtemperaturee
Lubricate the seals and run always a test connection to ensure both
halveconnect correctly.
connect screw couplings aways up to the stop mark.



喜欢1 评分0

最新喜欢:

菩提树菩提树
游客

返回顶部